Confirm which version of UFC 1-200-01 the contract invokes, since WBDG now publishes a reissued digital edition that cancels the December 2024 version, and check that the code analysis uses the 2024 IBC and 2024 IEBC it directs, as modified by the UFC. Then trace each DoD modification that affects the project, plus the other UFCs it sends you to for fire protection and antiterrorism, through the drawings and specifications. AI can flag conflicts; the designer of record and the DoD authority decide compliance.
What does UFC 1-200-01 cover?
The digital UFC 1-200-01 calls itself the foundational document of the UFC program: it establishes the use of consensus building codes and standards and identifies criteria unique to the military. It applies to planning, design, and construction, including restoration and modernization, of DoD owned and occupied facilities regardless of funding source and delivery method.
WBDG’s UFC 1-200-01 page shows the criteria as active digital UFC content first published July 2, 2026, with the current version dated September 30, 2026. Its text states that it reissues and cancels the version dated December 17, 2024, and directs use of the 2024 IBC and 2024 IEBC, including errata, except as modified by this and other UFCs. Checked October 15, 2026. WBDG’s older page still describes the 2022 edition with Change 4, so record the exact version and date the task order names.
Chapter 2 of the UFC modifies the IBC chapter by chapter, Chapter 3 modifies the IEBC, and Chapter 4 covers corrosion prevention and control. WBDG’s change summary says fire, egress, and occupancy now defer to UFC 3-600-01 and NFPA 101; see the UFC 3-600-01 guide, the IBC guide, and the IEBC guide. The reissued discipline criteria have their own guides: architecture, roofing, civil engineering, geotechnical engineering, structural engineering, mechanical engineering, plumbing, and interior electrical.
Gather the criteria documents and the code analysis
Collect the task order or design criteria naming the UFC versions, the code analysis and life safety plans, the structural general notes with design criteria, the architectural plans, sections, and wall types, the specifications, and any installation or service-specific criteria. Download UFC 1-200-01, UFC 3-600-01, and UFC 4-010-01 from WBDG; they are free.
For renovation work, add the existing conditions survey and the scope narrative, because the UFC’s IEBC modifications decide what an alteration must upgrade.
Trace the DoD Building Code through the set
| Review question | Sources to compare | Decision to record |
|---|---|---|
| UFC version | Task order, code analysis, specifications | Confirm one UFC 1-200-01 version and date across the documents. |
| Model code editions | Code analysis, structural notes, specifications | Check that the IBC and IEBC editions cited match what the UFC version directs. |
| DoD modifications | UFC Chapter 2 and 3 entries, code analysis, drawings | List the modified IBC or IEBC provisions that affect this project and where each is shown. |
| Fire and life safety | Life safety plans, code analysis, UFC 3-600-01 | Confirm fire, egress, and occupancy decisions point to the fire protection criteria the UFC names. |
| Structural criteria | Structural general notes, design criteria, ASCE 7 references | Match the load standard edition in the notes to the one the UFC version cites. |
| Antiterrorism trigger | Scope narrative, cost data, UFC 4-010-01 | Record whether the project triggers antiterrorism requirements and where they are addressed. |
Antiterrorism criteria continue in the UFC 4-010-01 guide, loads in the ASCE 7 guide, and the code analysis itself in the code analysis corrections guide.
Example: structural notes on the superseded load standard
Hypothetical example. The design criteria for a new administrative building invoke the September 2026 UFC 1-200-01. The code analysis cites the 2024 IBC, but the structural general notes still cite the earlier UFC version and an older ASCE 7 edition, carried over from a previous project on the same installation.
The design criteria invoke the current UFC 1-200-01, but the structural general notes cite the superseded UFC and an older ASCE 7 edition. Confirm the governing criteria and coordinate the structural design basis with the code analysis.
The structural engineer of record confirms the governing load standard with the DoD reviewer. The finding is that the documents cite two bases, not that either design is unsafe.
Review DoD building code documents with Groundbook
Upload the current drawings and specifications to Groundbook, and state the edition, amendments, and review scope in your instructions. Add UFC 1-200-01 and the other UFCs the task order names from WBDG, which publishes them free, plus the IBC, IEBC, and standards the project uses from copies you are licensed to upload.
Compare the design criteria, code analysis, life safety plans, structural general notes, architectural drawings, and specifications. Flag a conflicting UFC version, model code or standard editions that differ from those the UFC directs, and modified provisions the drawings do not reflect. Use the supplied UFC 1-200-01 and cite both sources.
Groundbook links each potential finding to the sheets and documents involved. It compares what the documents state; it does not perform structural or code calculations.
Document review does not certify compliance with DoD criteria or replace the designer of record or the DoD authority having jurisdiction.